-40%
20
20
20
20
20
20

20" x 9" T-Slot Plate, Aluminum T-track, Metalworking, Fixture Plate, CNC Bed

$ 199.58

Availability: 63 in stock
  • Condition: New
  • Plate Thickness: 1-1/2 in
  • Overall Length: 20 in
  • Brand: Unbranded
  • Overall Width: 9 in

    Description

    20" x 9"  T-Slot Plate, Aluminum T-track, Metalworking, Fixture Plate, CNC Bed
    Tis is the
    CNC ROUTER, LASER. Base plate, pallet. Pin plate. Bench-top milling. Insert for a MDF bed. Etc.
    This plate accepts mounting on the base spoil-board, table, or
    screwing into a MDF router bed. Use your own clamp bolting system and pins, extrusions, etc.
    Holes are perfectly, square to each other: and to the holes next to them
    All holes on one face are chamfered.
    Hole Diameter: 0.322in (8.2MM) and are 10mm ON CENTER to the hole(s) neighbor.
    You can tap the holes if you wish. A (M10x1.5mm) tap cuts very nice clean threads for further bolting.
    The Plate is hard anodized. The anodizing is strong and tenacious; Will not fade in UV light, cannot be scrubbed off with steel wool, is impervious to alcohol, acetone, and will last for years with proper care.